Daler Xtra-Tac Self-Adhesive Board – 1120 x 815mm

Description

Daler Standard Self-Adhesive, Extra-Tac Mountboard

Cream Core Neutral ph 1.4mm

Board size: 1120x815mm / 44” x 32”

Repositionable pH neutral adhesive, this board is coated on one face with cold sticky, pressure sensitive adhesive, protected with a release paper.

This is ideal for mounting many kinds of lightweight & heavyweight paper, such as low value prints, textiles, tapestries and photographs. It is important to use with care.

The peel-off backing paper, over-printed blue. Adhesive is re-positionable to a limited degree before a permanent bond is formed over 24 hours.

Note: Bubbling may occur when the board is used with some types of paper.

How to use:

Fold back 1cm (0.5″) strip of the release paper along one edge, then position the item to be mounted. Pull the release paper out from below, smoothing out the air bubbles as you go. Never pull off the release paper first. The print can then be flattened using a Rubber Roller (10 cm / 4″ or 20 cm / 8″rollers are available). The acrylic adhesive develops full bond over two days.